Clearshield PRO ACTIV™

Self-Healing Paint Protection Film

Bara k?r, Clearshield Pro? ACTIV?

ÁñÁ«¿¿±ÈÍøÕ¾ ?r stolta ?ver att kunna erbjuda dig den senaste innovationen inom teknik f?r lackskyddsfilm (PPF). Clearshield? Pro ACTIV? ?r designad f?r att balansera omedelbar aktiverad sj?lvl?kning med den enast?ende rept?lighet som Clearshield Pro-namnet representerar.

Och till skillnad fr?n andra alternativ p? marknaden som b?de kr?ver v?rme och/eller vatten f?r att starta sj?lvl?kningsprocessen, utl?ses ACTIV-tekniken omedelbart n?r den ?r repad eller skadad. Dess topplack har ocks? en hydrofobisk, tv?rbunden design som bildar p?rlor och st?ter bort vatten, lera och smuts.

Skydda aktivt ditt fordons fabrikslack samtidigt som du f?rb?ttrar dess finish med Clearshield Pro ACTIV,? ”det b?sta skyddet du aldrig kommer att se”.

¡ú Broschyr installationsguide & data

¡ú

FUNKTIONER OCH F?RDELAR:

  • Aktiv sj?lvl?kande teknologi ¨C avancerad polymerteknik utl?ses omedelbart n?r den ?r repad eller skadad (ingen v?rme kr?vs)
  • Hydrofobisk, fl?ckbest?ndig – skyddar – utan att synas – ditt fordons finish fr?n skador orsakade av vatten, insektsst?nk, f?gelspillning, m.m.
  • Lyxigt utseende – bibeh?ll en glansig, nyvaxad look
  • Garanti? 10 ?rs skydd mot gulning, grumling, sprickbildning, skalning och m?gel
  • H?gre andrahandsv?rde f?r ditt fordon ¨C se till att din bil ser lika bra fr?sch ut som n?r du k?pte den
  • SPF 285+ ? f?rhindra UV-skador orsakade av blekning
  • Installeras av ÁñÁ«¿¿±ÈÍøÕ¾s professionella ?terf?rs?ljarn?tverk

  TEST ITEM TEST METHOD NOMINAL VALUE
PHYSICAL PROPERTIES Cap sheet Micrometer 1.5 mil (40 micron)
TPU thickness Micrometer 6 mil (150 micron)
Product thickness (TC+TPU+PSA) Micrometer 8 mil (200 micron)
Tensile stress at break ASTM D882 > 2,200 lbs/in2 (> 15 MPa)
Elongation at break (%) ASTM D882 > 250%
Break strength ASTM D882 > 45 lbs/in (83 N/cm)
GLOSS Gloss Adhered to paint panel, 60° gloss per ASTM D523 92 GU
ADHESION Initial dry peel adhesion Film applied dry, cured for 20 min at 72°F (22°C) 1,290 g/in (5 N/cm)
Initial wet peel adhesion Film applied wet, cured for 20 min at 72°F (22°C) 1,340 g/in (5 N/cm)
After heat age peel adhesion Adhered to paint panel, 3 min at 248°F (120°C) 2,700 g/in (10 N/cm)
Adhered state shrinkage Adhered to paint panel, 48 hrs at 176°F (80°C) No shrinkage
AGING TEST Heat aging Adhered to paint panel, 16 days at 176°F (80°C) Pass, NDE
Accelerated weathering ASTM G155 Cycle 7- 3,000 hrs Pass, NDE
IMPACT RESISTANCE Chip resistance SAE J400 (Gravelometer) Pass, NDE
CHEMICAL RESISTANCE Soap & water Samples submerged in chemical for 24 hrs followed by visual inspection. Pass, NDE
Isopropyl alcohol Pass, NDE
Mild acid (pH 9+) Pass, NDE
Windshield washer fluid Pass, NDE
Unleaded gasoline Samples submerged in chemical for 30 minutes followed by visual inspection in 24 hrs. Pass, NDE
Motor oil Pass, NDE
STAIN RESISTANCE Sharpie marker Lines were drawn on the film with a permanent Sharpie marker. Each line was wiped with a dry towel at 5- and 15-min and 24-hr intervals. No visual residue
SELF-HEALING Brass brush (Lincoln Electric KH582) Samples were scratched in a circular motion with a brass brush, then visually inspected @15-second intervals until scratches were no longer visible. < 1 minute, no visible scratches
Samples were scratched in a circular motion No visible scratches
with a brass brush, then exposed to mild heat
and visually inspected.

HC = h?rd bel?ggning, TPU = termisk plast polyuretan, PSA = tryckk?nsligt lim
Vidh?ftning: 180¡ã avdragning p? Instron dragprovare
NDU: ingen skadlig effekt
Obs: alla v?rden ?r nominella v?rden och b?r inte anv?ndas f?r specifikations?ndam?l.

H?llbarhetstid:
ÁñÁ«¿¿±ÈÍøÕ¾ rekommenderar att du anv?nder Clearshield Pro ACTIV inom ett ?r fr?n ink?psdatum.
Optimala f?rvaringsf?rh?llanden f?r Clearshield Pro ACTIV ?r 4¡ãC till 32¡ãC och 40% till 60% relativ luftfuktighet